Bestaro Machinery Co.,Ltd
Bestaro Cranes Serving the development of global industry
Add to Cart
High Efficiency And Low Consumption Container Reach Stacker Direct Motor Drive
Reach Stacker Introduction:
Container front crane, referred to as front crane. The container reach crane is a kind of crane used to load and unload containers, which belongs to a kind of lifting equipment, and can also be said to be a mobile machine. Container reach cranes are specially designed for 20-foot and 40-foot international containers. They are mainly used for container stacking and horizontal transportation in wharfs and stackyards. The number of code layers is high, and the utilization rate of the stacking plant is high. Cross-box operation is possible. It is especially used for container loading and unloading in small and medium-sized ports, railway stations and highway stations, and can also be used as auxiliary equipment in large container terminals.
Reach Stacker Performance parameters:
| Basic Configuration | Engine Model | VOLVO TAD1151 | Engine Rated Power/Speed | 265/2100kW/rpm |
| Engine Maximum Torque | 1780/1260N·m/rpm | Exhaust Emission Standard | Ⅲ | |
| Transmission Model | DANA 15.5HR36000 | Drive Axle Model | Kessler D102PL341 | |
| Tire | 18.00-25 40PR | |||
| Spreader | Model Number | SDJ450FA | Sideshift Distance | ±800mm |
| Rotation Angle | +105/-195° | Tilt Angle | 0° | |
| Dead Weight | 7.8t | |||
| Boom | Maximum Lift Height | 15100mm | Inclination | 0～60° |
| Machine Parameters | Whole Vehicle Quality | 72t | Overall Length | 11340mm |
| Overall Width | 6053-12185mm | Overall Height | 4770mm | |
| Wheelbase | 6000mm | Minimum Ground Clearance | 350mm | |
| Front Wheelbase | 3033mm | Rear Wheelbase | 2790mm | |
| Performance Parameters | Rated Load | 45t | Maximum Lifting Speed (No Load/Full Load) | 420/250mm/s |
| Maximum Descent Speed (No Load/Full Load) | 360/300mm/s | Maximum Form Speed (No Load/Full Load) | 25/21km/h | |
| Gradeability (No Load/Full Load) | 39/32% | Hydraulic System Working Pressure | 260bar | |
| 40' Container Aisle Width A2 | 13600mm | 40' Container Aisle Width A2 | 11300mm |
Reach Stacker Application:
The reach stacker is specially designed for 20-foot and 40-foot international containers. It is mainly used for container stacking and horizontal transportation in docks and stackyards. It is especially suitable for container loading and unloading in small and medium-sized ports, railway transfer stations and road transfer stations. It can also be used for container loading and unloading. Used as auxiliary equipment in large container terminals.
The general work flow is:
Unload the container on the collection card;
Stack the containers in the container yard;
Grab the container and move it where you want;
Load the container from the yard to the car
Construction Cases:
